Hari Om Scientific Traders

The rotary microtome is the most common instrument found in a histology laboratory. Specially designed for precise sectioning of tissue up to 1 micron thickness, it has a front located feed indicator with CAM Drive SYSTEM for accurate feed setting from 1-50 microns in step of 1 micron each. The microtome razor is fabricated from imported fine grain steel alloy tested for micro structures and the razor is heat treated to maintain optimum strength and sharpness

Key Features:

ü  Conveniently located Feed Indicator

ü  Automatic feed release mechanism

ü  Convenient Specimen holder

ü  Safety device

ü  Smooth Drive wheel with locking

ü  Vibration & shake Proof Operation

ü  Minimal Maintenance

ü  Reduced Hand Stress

ü  Sturdy, Rigid Construction

ü  Protective cover for easy cleaning & lubrication

OCTAGONAL Magnetic Stirring Bars With
Moulded pivot ring.Angular Surface Creates
high turbulance even at low speed,provides
greater surface area and added turbulance
compared to Cylinderical bars.

Size Availabel:- 5x10,8x20, 8x25,8x35,8x50,10x60,10x70
Rice Megnet:- 3x5,3x7

• Rugged construction
• Longer service life
• Easy to maintain

Useful for making tablets up to 500 mg to 1gm and Size of punch & die is 10-12 mm. Automatic compressions and ejection device has been provided, actuated by revolution of the wheel drive. Feed and removal of tablets has also been made automatic. Acentric pressure system has been applied for easy setting of thickness and hardness of tablets. S.S. hopper has been given.
The unit has been mounted on a mild steel fabrication. Complete with one die and punch set made of stainless steel. Easy setting for thickness & hardness of tablets with nuts and lock nuts.

• Consistent performance
• Tough in construction
• Longer functional life

We are one of the trustworthy manufacturers and suppliers of specifically engineered Bulk Density Apparatus that is used in various laboratory applications and processes. The proffered series is of a microprocessor-based instrument designed for studying the packing down of powder beds of several chemical and pharmaceutical powders. Accurate and reliable in operation, the apparatus is widely demanded.

Features:

Tough construction

Longer operational life

Portable

Salient Features
 
Based on E.M.F.C Technology
 
Halogen Heating System
 
Temprature Range upto 200°C
 
RS232C Interface
 
The Mode for testing Automatic, Timing, Manual
 
Moisture Balance based on E.M.F.C sensor and its working
on the principle of thermal force, from the percentage between
the weight when the sample is dry and the weight when the
sample is moist. we can get the value of moisture.
 

Technical Specifications

Display: 128x64 Graphical LCD

Keypad: 20Key

Temperature Resolution: 0.01*C

These are equipped with Imported optical components and accepts observation tube up to the Length of 200mm. It ensures permanent and undisturbed focus, even with different types of dense liquids. The angular scale is divided O to 360 in steps of 1 degree to enable direct reading 0.005 and estimation of 0.002. ISS units enable direct reading 0.1 and by estimation to 0.05 sugar degrees. These are supplied with two polarimeter tubes 100mm & 200 mm Sodium lamp, power supply for sodium lamp and rexine cover

COD Digestion Apparatus With Auto Time Control

& Microprocessor Based PID Temperature Controller:

In wastewater treatment, the Chemical Oxygen Demand (COD) is an Important measurement for the amount of oxygen that Is required to break down pollutants (organic substances) in water.

     To determination of Chemical Oxygen Demand.

     Solid state block heated unit with provision for samples to be digested at a time.

     36 mm diameter reaction vessels with 20 ml. sample size to heat at temperature of 1500C ± IOC.

Display : LCD, Wavelength Range : 340 to 1000 nm

Spectral Bandwidth : 2 nm,

Wave Length Accuracy : ± 3 nm

Repeatability : ± 2 nm

Resolution : 1 nm

Out Put Range: Abs. (OD) : 0.097-to 2.000A , %T : 0-100, Conc. : 0 – 1999.

Resolution: %T : 0.1 %T, Abs : 0 to 0.001, Conc. : 1,

Direct Concentration measurement :Yes Available

Monochromator : 600 Lines / mm, Lamp : Tungsten–Halogen Lamp 12V/20W

Detector : Silicon Photodiode

Readability : ± 0.3% T, Stray Light: < 0.3% T

Stability : ± 0.002 A/h (At 500 nm, after warming up)

Standard Cell Holder : 4-position 10 mm cell changer

Interface to PC : U.S.B. / RS-232 window operated Software

Sample Holder : 4 Position adjustable sample holder

Power Supply : 230 V ± 10% AC, 50 Hz.

We are among the renowned names of the business, to manufacture and supply Laboratory Hot Plate, which is vastly used for laboratory experimentation purposes. Specifically designed at our end, these hot plates find a vast application in heating glassware or its contents. Handed over in numerous specifications, these laboratory hot plates are provided in tamper proof packaging, so as to prevent damages.

Features:

Portable

Tough in construction

Longer functional life

Our company is engaged in manufacturing and supplying Colony Counter that is vastly used for laboratory processes. Used for counting colonies of bacteria or other microorganisms, the proffered compilation is easy to use and reliable in performance. Owing to the tough construction, portability and consistent performance, the selection is massively acclaimed among our customers. The series can be obtained at affordable costs.

Features:

Tough construction
Longer functional life
Optimum performance

Our offered products are made employing the sophisticated techniques and quality tested material which is obtained from top merchants of market. We have advanced infrastructure, which is spread over large area and is rooted with sophisticated tools and machines. In addition to this, we keep close connection with our clientele to present these products as per their demands and requirements. We have appointed a team of quality controllers who have affluent knowledge of this field. These products are highly employed in the market for their longer service life, sturdy nature, low maintenance and low prices .

Used for determination of disintegration of time of tablets. The test equipment consist of 1 litre beaker, tablet can be tested simultaneously through motorized shaft moves up and down direction of 30 R.P.M approx.; carrying a rigid basket rack assembly. On the upper end of the shaft is fitted a horizontal strip to support cylindrical standard size glass tubes with stainless steel wire gauge bottom. Cylindrical basket moves up and down with standard perforated made of acrylic sheet inside in one litre glass beaker of distilled water. Unit having hot plate rating 125 watts fixed on the top for beaker. Temperature can be maintained by thermostat in between 35 ⁰c to 37⁰c. Digital timer can be fixed with the machine variable speed also available in this machine.

    Antibiotic Zone Reader: Provides a rapid and accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri-dish.

Digital Flame Photometer  is a simple and easy to operate instrument for determination of concentration of Sodium, potassium, Calcium and Lithium. It is an ideal instrument for Clinical, Medical, Bio-Medical and Soil Testing Laboratories. 

This instrument is supplied in two units viz. Main Unit and Compressor Unit. The main unit comprises of digital displays, detector, filters and nebulizer. The compressor unit supplies the compressed air to the main unit. 

PIPETTE FILLER: These bulb type pipette fillers are designed for one hand operation. pipette e fillers improve worker safety by eliminating mouth pipetting and handling of hazardous materials. Users can control air evacuate????on, liquid uptake, and liquid dispensing with three valves containing chemically resistant stainless-steel balls. Pinching or releasing valves provides smooth liquid flow. Fits standard size pipettes. Pipe filler with 3 valves: Valve A: Release air valve S: Filling valve E: Delivery size : 50ml

These holders for vacuum filtration accept 47 mm diameter filters. the filter support is stainless steel screen

The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage. it has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter. And a silicon O-Ring in the avoid

The screen fits between top and base part, and the whole is held together with a practical hand clamp.

The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required. When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.

Application

Microbiological quality control, e .g testing of water, soft drink, beer and wine.

Collection of particles for analysis, e. g. for the gravimetric determination of forging solid material in lubricating oils acc. To DIN 51592, and the microscopy of particles in infusion solutions to determine their origin

Clarifying or ultra cleaning of liquid

Specification:

Material: Stainless steel 316 Quality

Filter support: stainless steel screen

Sealing: silicon O –ring

Funnel Cap: 250 Ml

Filter diameter required: Membrane filter, 47 mm prefilter, 47mm

Filtration area: 12.5 cm2

Maximum operating pressure: Vacuum Only.

Sterilization: Autoclaving (max.121 C )

• Rugged in construction
• Less maintenance required
• Excellent capacity

Being one of the preferred choices of our clients, we engaged in manufacturing and supplying Rotary Shaker that is massively used for mixing cultures, chemicals, solvents and other fluids in test tubes & glass vessels. Handed over in tamper proof packaging, the proposed series is vastly demanded in chemistry and biology laboratories. Before the final dispatch, the entire series is tested for its flawlessness.

Features:

Strong construction

Longer functional life

Good performance

The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) or Teflon lined hydrothermal autoclave reactors and the second is PPL lined autoclave. Hydrothermal reactor mainly made up o two parts; outer high-quality stainless steel jacket and inner Teflon liner or Teflon chamber. Iin the Teflon-lined autoclave, the reaction is carried out at maximum 240-degree Celsius (428 Fahrenheit), while the safe temperature is 200-degree Celsius (392 Fahrenheit). PPL lined reactor use for the reaction operate at higher temperature, where the safe temperature will be 260-degree Celsius (500 Fahrenheit) and the maximum operating temperature is 280-degree Celsius (536 Fahrenheit). This product extensively used in the scientific laboratory, research and development labs institutional organizations, quality analysis section in industries etc.

These holders for vacuum filtration accept 47 mm diameter filters. the filter support is stainless steel screen

The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage. it has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter. And a silicon O-Ring in the avoid

The screen fits between top and base part, and the whole is held together with a practical hand clamp.

The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required. When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.

Application

Microbiological quality control, e .g testing of water, soft drink, beer and wine.

Collection of particles for analysis, e. g. for the gravimetric determination of forging solid material in lubricating oils acc. To DIN 51592, and the microscopy of particles in infusion solutions to determine their origin

Clarifying or ultra cleaning of liquid

Specification:

Material: Stainless steel 316 Quality

Filter support: stainless steel screen

Sealing: silicon O –ring

Funnel Cap: 250 Ml

Filter diameter required: Membrane filter, 47 mm prefilter, 47mm

Filtration area: 12.5 cm2

Maximum operating pressure: Vacuum Only.

Sterilization: Autoclaving (max.121 C )

we are involved in manufacturing and supplying Laboratory Shaker that is used for stirring liquids in laboratories. Laboratory shakers are manufactured in accordance with the set industry guidelines. Appreciated and widely demanded for their durability, optimum performance, rugged construction and minimal maintenance, these efficient shakers are quite popular.

Features:

• Consistent operation
• Longer functional life
• Tough in construction

Digital Ultrasonic cleaning is based on the cavitation effect caused by high frequency wave vibration in the fluid caused by the ultrasonic transducers. Microscopic bubbles are formed and the implode violently causing cavitation which creates an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic dents & crevices, cleaning them thoroughly and consistently.

Ultrasonic Cleaning is extremely effective at removing dirt and grime which would normally require tedious manual cleaning by hand. It has been used to clean a wide variety of instruments and mechanical parts such as carburettors, toner heads, metal parts, gears, watches, surgical instruments, PCBS, etc returning them to almost like new condition without damaging parts. 

We Hari Om Scientific Traders engaged as the foremost Manufacturer of Industrial Dehumidifier, Portable Dehumidifier and many more.

This capsule filling performs a number of tasks that increases its demand in pharmaceutical industry. Semi Automatic Capsule Filling Machine consists of no. of plates for putting capsules by hand where as it also has function for removing caps of the capsules. Filling of powder in capsule is done by dispensing of brush pressing and after that fixing of caps is done.

To detremine the durability of tablets from the time of production to the time of use. Complete with rotating drum made of Acrylic with blade which carries the tablet up to pre-determined height while the drum is rotating at prescribed speed. The rotation period is dtermined by electrical timer.

Our company is one of the preferred choices of its customers for proffering Infrared Moisture Balance that is massively used for determining moisture contents in powdered or granules sample. Manufactured in compliance with the preset industry guidelines, these machines are appreciated for their reliable performance, tough construction and longer service life. Patrons can obtain the selection at industry leading prices.

Features:

• Rugged construction

• Functionally fluent

• Efficient in operation

• Robustly constructed
• Longer functional life
• Leo maintenance needed

• Excellent performance
• Rugged in construction
• Low maintenance needed